Best practices for Smart Home Leak Detection & Prevention Solutions

Leak detection and prevention systems are an important part of Smart Home security.  Home water damage is a big issue for insurance companies and homeowners. EcoNet’s Bulldog Valve Robot when used in combination with leak sensors, can greatly reduce the risk of water damage. A reliable Leak Detection & Prevention solution is not all about the technology.  Human behaviour is an important factor to consider in implementing a successful leak prevention solution. 

• Leak Sensors should be labelled “Leak Sensor – Do not move”.  If a leak sensor is easily available to tampering/moving, on purpose or otherwise, there is a good chance it will happen.  You need to consider children, renters, pets, etc. when positioning the leak sensors. (cleaning person has no idea what the leak sensor is and moves it from behind the toilet to the window shelf making the device ineffective)
  
  
• Leak Sensor batteries should be checked and replace on a regular schedule as required.
  
  
  
  

• Automation routines that shut off the water in the case of a leak should run locally and not rely on an internet connection or a connection to the “cloud”.
  
  
  
  
• The system should be tested on a regular basis. (get a leak sensor wet and make sure the water shuts off and “Leak Alerts” are sent and received.
• Leak alerts should be set to send to two or more people. (homeowner and neighbour, homeowner and renter, etc.)
• If the home is empty for an extended period the water should be shutoff, ideally automatically by the smart home system.  If not automatically, by the homeowner.
• Add battery backup where practical to parts of the solution that rely on standard AC home power.
• The homeowner and other family members should be trained/instructed how to use the water shut off in the case of an emergency.  Many homeowners do not know where to find their water shut off.
• Some motorized valve controllers that are designed to mount over an existing ball valve use a mounting assembly that is secured over the plumbing pipe.  Using the plumbing pipe to secure the motor assembly could cause stress on the valve connection to the plumbing.  Motor assemblies should be secured to the valve body only and not to the plumbing pipes.
  
  
  
  

• In the case of a leak in a laundry room, automation should be setup to shut off both the water main and the power to the washing machine.  A washing machine could empty its tank through a bad hose and shutting off the water main would not stop this water pouring through the ceiling into the room below.