Supported Valve
If you are having trouble with your Bulldog Valve Robot installation, Please email support@EcoNetControls.com. An Installation Specialist will get back to you promptly and can help with installation, setup and configuration.
The Bulldog mounts over a standard ball valve, no special tools or plumbing work is required. The included mounting kit supports various valve types in sizes ½" inch to 2 inch. (Typical Residential Installations use a ¾" or a 1" valve size)
The Valve size is determined by the plumbing pipe size. (¾" pipe uses a ¾ valve, 1" diameter pipe uses a 1" valve, and so on..)
The valve size is usally printed or stamped on the side of the valve body.
♦ 1/2" Valves ♦ 3/4" Valves ♦ 1" Inch Valves ♦ 1.25" Valves ♦ 1.5" Valves ♦ 2" Valves ♦
The table below lists the valve sizes and types that are compatible with the Bulldog Valve Robot:
